[wish-info] determine source for messages

[spiderwebwebb]

I just installed the windows version of misterhouse. I have both the cm11a
and cm15a. However I am using the cm11a right now due to compatibility with
misterhouse. I have 5 door sensors (one on each door and my garage door), 1
motion sensor (hopefully more), 2 flood light motion sensors (one installed
in the back), one lightbult screwer inner thinger (in one basement socket).
3 lamp controls (plugged into the wall, but the wife unplugged the lamp).
two x10 cameras (one looking at the front door, the other not used) and a
wireless tranceiver (M751) I got most of this in a bundle with the security
module DS7000

two things:
1) is there source to the door window opener that I can get it to be
recognized by misterhouse and perform an action based on that open door or
do i need the w800
2) how do i interpret the log below to know what darn device is sending
this:

.............

CM11 data=85 hex=55
CM11 done
Backlog:
X10: interface=cm11 isfunc=1 save_unit=XB1 data=XBJ
CM11 send data=BJ
CM11 dim=0 header=00000110 hb=1110 cb=0010 bd=0x06,0xe2 checksum=0xe8
CM11 send: 06e2 try: 1
..
CM11 data=232 hex=e8
CM11 ack
CM11 send pc_ok, try: 1
............
CM11 data=85 hex=55
CM11 done
Backlog:
12/03/07 10:44:00 AM: Saving object states ... done
X10: interface=cm11 isfunc=0 save_unit=XB1 data=XB1
CM11 send data=B1
CM11 dim=0 header=00000100 hb=1110 cb=0110 bd=0x04,0xe6 checksum=0xea
CM11 send: 04e6 try: 1
..
CM11 data=234 hex=ea
CM11 ack
CM11 send pc_ok, try: 1
............
CM11 data=85 hex=55
CM11 done
Backlog:
X10: interface=cm11 isfunc=1 save_unit=XB1 data=XBK
CM11 send data=BK
CM11 dim=0 header=00000110 hb=1110 cb=0011 bd=0x06,0xe3 checksum=0xe9
CM11 send: 06e3 try: 1