[wish-info] x10logd error

Sjef Kuppens

2005-07-06 08:23:04 UTC

Sorry but i allready found the problem.

The command should be /usr/sbin/cm11ad -device /dev/ttyS2 --> so without
the 0.

Dmesg fooled me with this.;)

Regards.

Sjef

_____

Van: Sjef Kuppens [mailto:***@xs4all.nl]
Verzonden: woensdag 6 juli 2005 9:46
Aan: 'wish-***@lists.sourceforge.net.'
Onderwerp: x10logd error

Hi,

I have a problem with starting the x10logd ..

It gives this error.

Error: Unable to open device /dev/x10/log (Bad address)

When I check /var/log/message I only notice the Input/output error..

Jul 6 09:19:58 Pyro cm11ad[2268]: starting. api-device=/dev/x10/.api,
pidfile=/var/run/x10d.pid

Jul 6 09:19:58 Pyro cm11ad[2268]: Successfully opened X10 API device
/dev/x10/.api

Jul 6 09:19:59 Pyro cm11ad[2269]: starting transceiver (pthread_create)

Jul 6 09:19:59 Pyro cm11ad[2271]: Transmit thread starting

Jul 6 09:19:59 Pyro cm11ad[2269]: pthread_crate completed...transceiver
started

Jul 6 09:20:00 Pyro cm11ad[2271]: cm11a version 0 found

Jul 6 09:20:00 Pyro cm11ad[2271]: CM11A current date/time Wed Dec 15
08:04:03 2004

Jul 6 09:20:00 Pyro cm11ad[2271]: ERROR: read error (Input/output error)

Jul 6 09:20:00 Pyro cm11ad[2269]: got connect message

Jul 6 09:20:00 Pyro cm11ad[2269]: transmitter connected

Jul 6 09:20:00 Pyro cm11ad[2269]: Waiting for input from API interface

I also checked if my cm11 is connect to the right serial port.

ttyS02 at 0x03e8 (irq = 4) is a 16550A

ttyS03 at 0x02e8 (irq = 3) is a 16550A

If I use one off the above devices with /usr/sbin/cm11ad -device /dev/ttyS02
I get the following error.

Jul 6 09:42:54 Pyro cm11ad[2340]: Error opening /dev/ttyS02 (No such file
or directory)

Without the the 2 (/usr/sbin/cm11ad -device /dev/ttyS0) I only get de input
/ output error.

What am I doing wrong ?

Thnx

Sjef